How to install a screen protector perfectly

Installing a screen protector can be a little tricky, but if you do it right, you can do it perfectly. Here are the steps to install a screen protector:

1.Clean environment: Find a clean environment, otherwise the fine dust and particles in the air will cause you a lot of trouble when you stick the film.

2.Clean the screen: use a microfiber cloth with alcohol to clean the screen thoroughly, make sure there are no smudges or dust particles on the screen, then wipe it with a dry microfiber cloth, if there is any residual substance, please stick it with a dust removal sticker.

3.Aligning the Screen Protector: Carefully align the screen protector with the device screen, ensuring perfect alignment.

4.Peel off the backing: Gently peel off the backing of the screen protector, making sure the sticky side doesn't touch anything other than the screen.

5.Applying the Screen Protector: After removing the backing, carefully apply the screen protector to the screen of your device. Start at one end of the screen and slowly walk to the other, smoothing out any air bubbles as you go.

6.Finishing: After applying the screen protector, use a credit card or similar tool to smooth out any remaining air bubbles. Finally, use a microfiber cloth to gently wipe away any fingerprints or smudges.

(P.S. If there are air bubbles that cannot be discharged, pay attention to whether there is dust in it. If there is, please stick it out with the attached dust removal sticker, so that the air bubbles can be eliminated)

Remember, patience is key when installing a screen protector. If you rush this process, you may end up with air bubbles that are difficult to remove. Take your time and follow the steps carefully to ensure a flawless installation.

Do you find it troublesome, is there no easier way to stick the film?

The answer is yes, the Lito magic box screen protector has the function of automatically aligning the screen protector. When installing, you only need to pull the backing to absorb and take out the dust on the screen. With a light press, it will automatically vent and fit. Open the tray, then you can get the most perfect screen protector installation.